
Organic Chemistry
Organic chemistry can feel like an avalanche of names and drawings — but almost every question in this unit reduces to one fact: carbon forms exactly four bonds and loves bonding to itself. Once that's automatic, naming, isomers, hydrocarbons, alcohols, acids, esters and polymers are all just that one idea dressed up differently. These notes work through the logic in the order examiners actually build on it — bonding first, then naming, then reactions.
Overview
What organic chemistry actually studies
Organic chemistry is the chemistry of carbon compounds — specifically, compounds where carbon is covalently bonded to hydrogen and, often, oxygen, nitrogen or halogens. Every skill in this unit (naming, drawing, predicting reactions) traces back to two structural facts about carbon: it always forms four bonds (tetravalency), and it bonds to itself extensively (catenation).
- Millions of organic compounds exist because carbon's four bonds can be arranged in endless combinations — long chains, branches, rings, single/double/triple links.
- A handful of simple carbon compounds (CO₂, carbonates, cyanides) are classed as inorganic by convention, even though they contain carbon.
- This unit builds in a fixed order: bonding → naming → isomerism → hydrocarbon families → functional groups → polymers → industrial separation (crude oil).
The shape of the chapter
Command terms this unit tests hardest
| Command term | What it demands | AO | Mark-earning move |
|---|---|---|---|
| Construct | Build a diagram, structure or table from given information | Knowing & understanding / Communication | Must show every atom/bond/electron explicitly — a correct description in words instead of the drawing scores zero. |
| State | Give a specific, concise answer with no reasoning | Knowing & understanding | One clean statement is enough for full marks; extra unrequired explanation isn't rewarded (or penalised unless it contradicts the answer). |
| Explain | Give reasons or a mechanism, not just an observation | Applying / reasoning | Needs a because…therefore… chain — a bare fact with no linking reason only earns partial credit. |
| Deduce | Reach a conclusion from information given in the question, not general theory | Reasoning with data | Must reference the actual numbers/data given — a generic textbook answer not tied to the data loses marks. |
| Distinguish | State differences between two or more items | Analysing | Needs a paired comparison (X does…, whereas Y does…) — describing only one item scores zero. |
Key point
Introduction to Organic Compounds
Why carbon is special
Carbon sits in Group 14 with electron configuration 2,4 — two electrons in the inner shell, four in the outer shell. That outer shell needs four more electrons to complete an octet, and carbon achieves this by sharing (not gaining or losing) four electrons. Sharing four electrons means carbon forms four covalent bonds in every stable compound — this single fact is called tetravalency, and it's the reason organic chemistry exists as its own branch of chemistry.
- Tetravalency: every carbon atom you'll be asked to draw has exactly four bonds — never three, never five.
- Catenation: C–C bonds are strong and non-polar enough that carbon links to itself in chains, branches and rings; Si and Ge (same group) can also do this but far less extensively — that's why almost every Group 14 compound you'll meet is carbon-based, not silicon- or germanium-based.
- Because those four bonds can be arranged as 4 single bonds, or combinations including double and triple bonds, one element generates millions of distinct compounds — no other element does this.
- In , all four C–H bonds are identical: same length (), same strength, same bond angle () — the electron pairs around carbon repel each other equally, forcing a tetrahedral shape, which is why methane is drawn as a tetrahedron rather than a flat cross.
- Organic compound
- A compound whose molecules contain carbon covalently bonded to hydrogen (almost always) and often oxygen, nitrogen or halogens — a few simple carbon compounds (carbonates, CO₂) are classed as inorganic by convention.
- Tetravalency
- The property of carbon forming exactly four covalent bonds in every stable compound, arising from its four valence electrons (2,4 configuration).
- Catenation
- The ability of atoms of the same element to bond to each other repeatedly, building chains, branches or rings — carbon does this far more extensively than any other element.
- Saturated compound
- Contains only single covalent bonds between carbon atoms — every carbon holds the maximum possible number of hydrogens.
- Unsaturated compound
- Contains at least one C=C or C≡C multiple bond — fewer hydrogens per carbon than the saturated equivalent, and reacts by addition across that multiple bond.
Lewis dot diagrams of methane, ethane, ethene and ethyne
Every carbon atom in all four molecules has exactly four bonding pairs — arranged differently each time.
Carbon's electron arrangement
Ground-state electron configuration of carbon — 2 electrons in the inner shell and 4 in the outer shell (the '2,4' arrangement).
On bonding, carbon behaves as if one 2s electron has moved into the empty 2p orbital, giving four unpaired electrons available for bonding, not the two seen in the ground state.
You don't need orbital-promotion theory by name at this level — but you DO need to explain carbon behaves as having 4 bonding electrons available, not 2.
Worked example
Constructing Lewis dot diagrams across single, double and triple bonds
Worked example
Explaining the Group 14 hydride trend
Drawing carbon with only 2 bonds
Because carbon's ground-state configuration (2,4) has only 2 unpaired electrons in the outer shell, students draw carbon forming only 2 covalent bonds, like oxygen.
Consequence: Every structure built on that wrong start is unbalanced — you lose the construction mark AND every mark downstream that depends on correct valency (naming, isomer counts, equations).
Fix: Start from the rule, not the raw configuration: carbon behaves as having 4 unpaired valence electrons available, so every carbon atom you draw gets exactly 4 bonds, no exceptions.
Examiner tip
Key takeaways
- Tetravalency = carbon always forms 4 covalent bonds, from its 2,4 electron configuration.
- Catenation = carbon bonds to itself repeatedly, building chains/branches/rings — the reason millions of organic compounds exist.
- The SAME 4 bonds can be arranged as 4 singles, 1 double + 2 singles, or 1 triple + 1 single — this is what separates alkanes/alkenes/alkynes.
- Group 14 trend: C, Si, Ge all form 4 bonds because they all have 4 valence electrons — bond count doesn't change down the group.
IUPAC Naming of Organic Compounds
The naming logic
Every IUPAC name is built the same way: find the longest continuous carbon chain (the 'stem'), name any branches as prefixes, then add a suffix that flags the functional group. Locants (numbers) are added only when there's a choice — and examiners always test whether you chose the numbering that gives the LOWEST possible locants.
- Step 1 — find the parent chain: the longest continuous chain of carbons that includes the functional group (not necessarily drawn in a straight line on the page).
- Step 2 — name the stem using the carbon-count prefix (meth–, eth–, prop–, but–, pent–, hex–, hept–, oct–, non–, dec–).
- Step 3 — add the suffix for the functional group: –ane (alkane), –ene (one C=C), –yne (one C≡C), –ol (alcohol), –oic acid (carboxylic acid).
- Step 4 — number from whichever end gives the LOWEST locant to the functional group or first point of difference; branches get their own locant + prefix (2-methyl, 3-ethyl…), listed alphabetically if more than one.
Carbon-chain prefixes (memorise these)
| Carbons | Prefix | Example molecule |
|---|---|---|
| 1 | meth- | methane, CH₄ |
| 2 | eth- | ethane, C₂H₆ |
| 3 | prop- | propane, C₃H₈ |
| 4 | but- | butane, C₄H₁₀ |
| 5 | pent- | pentane, C₅H₁₂ |
| 6 | hex- | hexane, C₆H₁₄ |
| 7 | hept- | heptane, C₇H₁₆ |
| 8 | oct- | octane, C₈H₁₈ |
| 9 | non- | nonane, C₉H₂₀ |
| 10 | dec- | decane, C₁₀H₂₂ |
Mnemonic
My Elephant Practices Ballet, Performing High Handstands On Nine Drums
First letters give the prefix order Meth-Eth-Prop-But-Pent-Hex-Hept-Oct-Non-Dec (1 to 10 carbons) — for when you blank on the order under exam pressure.
Worked example
Naming a branched alkane
Numbering from the wrong end
Numbering the parent chain from whichever end you happened to start drawing from, instead of checking both directions.
Consequence: Gives a non-IUPAC name (e.g. 3-methylbutane instead of 2-methylbutane) — the full naming mark is lost even though every atom is in the right place.
Fix: Always test both directions mentally and pick the one giving the LOWEST locant to the substituent/functional group before committing to a number.
Examiner tip
Key takeaways
- Parent chain = longest continuous chain THROUGH the functional group, not just the longest chain visible.
- Suffix tells you the functional group: –ane/–ene/–yne for hydrocarbons, –ol for alcohols, –oic acid for carboxylic acids.
- Number from whichever end gives the lowest locant — always check both directions.
- Memorise meth– to dec– cold; every naming question depends on instant recall of this list.
Structural Formula, Condensed Formula and Isomerism
Three ways to represent the same molecule
A structural formula shows every atom and every bond explicitly, like the Lewis diagrams already drawn. A condensed structural formula groups atoms onto one line without drawing every bond — instead of a full displayed structure. Both represent identical molecules; which one you're asked for depends entirely on the command term and whether the word 'condensed' appears in the question.
- Molecular formula (e.g. ) tells you only atom counts — it can't distinguish between different arrangements of those atoms.
- Structural isomers share the same molecular formula but have atoms connected in a different order — this is why describes multiple different real molecules, each with its own name and its own physical properties.
- Isomers are NOT 'basically the same compound' — different bonding arrangements change boiling point, solubility, reactivity and smell, even though the atom count is identical.
- Structural formula
- Shows every atom and every individual bond in the molecule, drawn out in full (also called a displayed formula).
- Condensed structural formula
- Groups atoms onto a single line without drawing every bond explicitly, e.g. — faster to write, still shows connectivity.
- Isomers
- Two or more compounds with the same molecular formula but a different arrangement of atoms, giving different structures and (usually) different properties.
- Chain isomerism
- Isomers differing in the branching pattern of the carbon skeleton (e.g. butane vs 2-methylpropane).
- Positional isomerism
- Isomers differing only in WHERE a functional group is attached to an otherwise identical chain (e.g. butan-1-ol vs butan-2-ol).
Three structural isomers of C₄H₁₀O
Same molecular formula, three different molecules with three different property sets.
Worked example
Explaining property differences between isomers
Frequently confused
| Concept A | Concept B | The distinction that matters |
|---|---|---|
| Chain isomerism | Positional isomerism | Chain isomers differ in how the carbon skeleton branches (butane vs 2-methylpropane); positional isomers have an identical skeleton but the functional group sits on a different carbon (butan-1-ol vs butan-2-ol). |
| Molecular formula | Structural formula | Molecular formula () only counts atoms and can match several real compounds; structural formula shows actual bonding and identifies exactly one compound. |
| Structural formula | Condensed structural formula | Structural formula draws every bond as a line; condensed formula groups atoms on one line () with bonds implied — use condensed only when the question doesn't ask for a full displayed structure. |
Treating isomers as 'the same compound'
Assuming that because two isomers share a molecular formula they must have near-identical properties.
Consequence: Leads to wrong reasoning on 'explain the difference in boiling point/solubility' questions — you describe similarities instead of the structural difference actually being tested.
Fix: Whenever a question gives you isomer data, the explanation MUST be about structure (branching, position of functional group), never about the shared molecular formula.
Key takeaways
- Same molecular formula + different atom arrangement = isomers, and different arrangement always changes physical properties.
- Chain isomers differ in branching; positional isomers differ in where the functional group sits.
- Branching lowers boiling point (less surface contact) but can raise water solubility (OH group relatively dominates a smaller molecule).
- Condensed formula ≠ molecular formula ≠ structural formula — know which one a command term is asking for.
Hydrocarbons
Saturated vs unsaturated
Hydrocarbons contain only carbon and hydrogen. How the carbons are joined — single, double or triple bonds — splits them into three families with three different general formulas and three different reactivity patterns.
- Alkanes (single C–C bonds only) are saturated — every carbon already holds the maximum number of hydrogens, so alkanes can only react by substitution, and only under forcing conditions like UV light.
- Alkenes (one C=C) and alkynes (one C≡C) are unsaturated — the multiple bond is high electron density that reacts readily by addition, breaking the multiple bond to form two new single bonds.
- Boiling point rises steadily up any homologous series as chain length increases — more carbons means more surface area, more van der Waals forces between neighbouring molecules, more energy needed to separate them.
General formulas
Alkanes — saturated, single bonds only.
Alkenes — one C=C double bond.
Alkynes — one C≡C triple bond.
Alkanes vs alkenes vs alkynes
| Feature | Alkanes | Alkenes | Alkynes |
|---|---|---|---|
| Bond type | C–C single bonds only | one C=C double bond | one C≡C triple bond |
| General formula | CₙH₂ₙ₊₂ | CₙH₂ₙ | CₙH₂ₙ₋₂ |
| Saturation | Saturated | Unsaturated | Unsaturated |
| Bromine water | No reaction in the dark (slow substitution needs UV) | Rapidly decolourises (addition) | Rapidly decolourises (addition) |
| Typical reaction | Substitution (needs UV/heat) | Addition (fast, room temperature) | Addition (fast, room temperature) |
Worked example
Linking bond length to bond enthalpy
Worked example
Distinguishing substitution from addition
Confusing the bromine water test conditions
Stating that alkenes need UV light to react with bromine water (copying the alkane + chlorine condition across).
Consequence: Directly contradicts the given data — alkenes decolourise bromine water instantly, in the dark, at room temperature; adding 'needs UV' loses the mark and shows a misunderstanding of addition vs substitution.
Fix: Keep the two reactions separate: alkane + halogen needs UV/heat (substitution, breaks a strong C-H bond); alkene + bromine water is instant (addition, no bond-breaking energy barrier because the double bond is already 'ready to react').
Examiner tip
Key takeaways
- Alkanes (CₙH₂ₙ₊₂) are saturated and react by substitution, needing UV/heat to break strong C-H bonds.
- Alkenes (CₙH₂ₙ) and alkynes (CₙH₂ₙ₋₂) are unsaturated and react instantly by addition — the basis of the bromine water test.
- Shorter C-C bonds are stronger: single (154 pm/348) < double (134 pm/612) < triple (120 pm/837 kJ mol⁻¹).
- Benzene's identical, intermediate bond data (140 pm/518) is evidence for delocalised electrons, not alternating single/double bonds.
Homologous Series and Functional Groups
One family, one pattern
A homologous series is a family of compounds sharing the same general formula and the same functional group, differing from each other only by one unit as you move up the series. Every member reacts the same chemical way (reactivity is controlled by the functional group), but boiling point and viscosity climb steadily as the chain gets longer.
- Functional group = the specific atom or group responsible for a compound's characteristic reactions (e.g. -OH makes something behave as an alcohol regardless of how long the attached chain is).
- Physical properties (boiling point, state, viscosity) trend smoothly within a series because they depend on chain length; chemical properties stay constant within a series because they depend on the functional group.
- Consecutive members differ by exactly CH₂ (14 g/mol) — this is the defining test for a genuine homologous series.
- Homologous series
- A family of organic compounds with the same functional group and general formula, where each successive member differs by one -CH₂- unit and shows gradual change in physical properties.
- Functional group
- A specific group of atoms within a molecule responsible for its characteristic chemical reactions (e.g. -OH, -COOH, -COO-).
Major homologous series you must recognise
| Series | General formula | Functional group | Suffix | Example |
|---|---|---|---|---|
| Alkanes | CₙH₂ₙ₊₂ | none (C-C, C-H only) | -ane | propane, C₃H₈ |
| Alkenes | CₙH₂ₙ | C=C | -ene | propene, C₃H₆ |
| Alkynes | CₙH₂ₙ₋₂ | C≡C | -yne | propyne, C₃H₄ |
| Alcohols | CₙH₂ₙ₊₁OH | -OH | -ol | propan-1-ol, C₃H₇OH |
| Carboxylic acids | CₙH₂ₙ₊₁COOH | -COOH | -oic acid | propanoic acid, C₂H₅COOH |
| Esters | R-COO-R' | -COO- | -oate | ethyl ethanoate |
Natural gas is a homologous series in a pipe
Key takeaways
- Homologous series = same general formula + same functional group + differ by CH₂ per step.
- Functional group controls chemical reactivity; chain length controls physical properties like boiling point.
- Learn the six series in the table cold — naming and reactivity questions assume instant recognition of these.
Alcohols
The -OH family
Alcohols carry the -OH (hydroxyl) functional group attached to a carbon chain, named with the suffix -ol. The position of that -OH and how many carbons are attached to the carbon bearing it (primary, secondary, tertiary) changes physical behaviour dramatically, as seen with the isomers.
- Primary alcohol: -OH attached to a carbon bonded to only one other carbon (e.g. butan-1-ol).
- Secondary alcohol: -OH carbon bonded to two other carbons (e.g. butan-2-ol).
- Tertiary alcohol: -OH carbon bonded to three other carbons (e.g. 2-methylpropan-2-ol) — no hydrogen left on that carbon at all.
- Small alcohols (methanol, ethanol, propanol) are fully miscible with water because the -OH group hydrogen-bonds strongly relative to the small hydrophobic chain; miscibility drops as the chain gets longer and the hydrophobic part dominates.
- Primary alcohol
- The -OH group is on a carbon attached to only one other carbon atom.
- Secondary alcohol
- The -OH group is on a carbon attached to two other carbon atoms.
- Tertiary alcohol
- The -OH group is on a carbon attached to three other carbon atoms.
Worked example
Classifying the C₄H₁₀O isomers by alcohol type
Ethanol: fuel and drink, methanol: poison
Misplacing the locant in alcohol names
Writing 'butanol-2' or forgetting the locant entirely for a straight-chain alcohol with more than one possible OH position.
Consequence: 'Butanol-2' isn't valid IUPAC form (the locant sits before the suffix: butan-2-ol) and omitting a needed locant makes the name ambiguous between isomers — both cost the naming mark.
Fix: Suffix locants sit immediately before the suffix they modify — butan-2-ol, not butanol-2. Only omit the locant when there's genuinely no ambiguity (methanol/ethanol never need one, since there's only one possible carbon).
Key takeaways
- Alcohols: -OH group, suffix -ol, classified primary/secondary/tertiary by carbons attached to the OH-bearing carbon.
- More branching = lower boiling point, but often HIGHER water solubility — don't confuse the two trends.
- Small alcohols are miscible with water via hydrogen bonding; miscibility falls as the hydrophobic chain gets longer.
Carboxylic Acids
The -COOH family
Carboxylic acids carry the -COOH (carboxyl) group, named with the suffix -oic acid. They're weak acids — they only partially ionise in water — but still show typical acid reactions: with reactive metals, bases, and carbonates.
- General formula: R-COOH, where R is a hydrocarbon chain (or just H for the simplest member, methanoic acid, HCOOH).
- Naming: count the carbon in -COOH as carbon 1 of the chain — ethanoic acid () has 2 carbons total, not 3.
- Test for a carboxylic acid: add sodium carbonate/hydrogencarbonate — brisk effervescence of gas confirms an acid, distinguishing it from alcohols (which don't react with carbonates).
General formula for carboxylic acids
Saturated carboxylic acid, one -COOH group; the carboxyl carbon always counts as carbon 1.
Worked example
Naming and testing a carboxylic acid
Vinegar, citric acid, and ant venom
Forgetting the COOH carbon in the chain count
Naming as 'ethanoic acid' by only counting the portion.
Consequence: Gives a 2-carbon name for a 3-carbon molecule — wrong stem, full naming mark lost, and any follow-on question builds on the wrong molecule.
Fix: Always count the -COOH carbon itself as carbon 1 of the parent chain before choosing the stem.
Key takeaways
- Carboxylic acids: -COOH group, suffix -oic acid, the COOH carbon counts as carbon 1.
- Weak acids — partially ionise, react with carbonates/hydrogencarbonates (CO₂ test) but give a weaker litmus/pH change than a strong acid of equal concentration.
Esterification and Naming Esters
Building an ester
Esterification is a condensation reaction: a carboxylic acid and an alcohol join together, releasing a water molecule, usually with concentrated sulfuric acid as catalyst and gentle heating. The product — an ester — carries the -COO- linkage and is named from BOTH starting materials, in a fixed order that's easy to get backwards.
- Naming order: [alcohol part, ending in -yl] + [acid part, ending in -oate] — e.g. ethanol + ethanoic acid → ethyl ethanoate.
- The reaction is reversible — excess water (or dilute acid/alkali) hydrolyses the ester back into the carboxylic acid and alcohol.
- Esters are generally volatile, sweet-smelling and only weakly water-soluble (compare to the parent alcohol/acid, both strong hydrogen-bonders) — exactly why they're used as flavourings and fragrances.
The esterification reaction
Carboxylic acid + alcohol ⇌ ester + water, catalysed by concentrated sulfuric acid, heated gently — a condensation (water-releasing) reaction.
Worked example
Naming an ester from its acid and alcohol
Esters smell like fruit — literally
Reversing the ester naming order
Naming an ester acid-part-first (e.g. 'ethanoate ethyl' instead of 'ethyl ethanoate').
Consequence: Non-standard name — even if the student clearly knows the correct product, examiners mark against strict IUPAC ester naming convention.
Fix: Memorise the fixed order: [alcohol]-yl [acid]-oate — always, no exceptions.
Key takeaways
- Ester = carboxylic acid + alcohol, condensation reaction releasing water, catalysed by conc. .
- Naming order is fixed: alcohol-derived '-yl' name first, acid-derived '-oate' name second.
- Esterification is reversible — hydrolysis breaks the ester back into acid + alcohol.
Polymers
From monomer to macromolecule
Addition polymerisation takes small unsaturated monomers (usually alkenes) and joins thousands of them, end to end, into one giant molecule — a polymer. The C=C double bond in each monomer opens up and forms new single bonds to neighbouring monomers, so the polymer backbone ends up as one continuous chain of single C-C bonds.
- Monomer = the small repeating unit (e.g. ethene, ); polymer = the long chain built from thousands of monomers (e.g. polyethylene).
- It's tetravalency AND catenation working together that make this possible: each carbon keeps exactly 4 bonds (tetravalency), while carbon's ability to bond to itself indefinitely (catenation) is what lets the chain grow to thousands of units without carbon 'running out' of bonding capacity.
- The repeat unit is written in square brackets with subscript n outside, showing the pattern repeats n times: for polyethylene.
- The C-C backbone is chemically very stable — strong, non-polar covalent bonds are not attacked by water, dilute acids or dilute alkalis, which is exactly why plastics resist decay but persist as waste for decades.
Addition polymerisation of ethene into polyethylene
The C=C double bond in each monomer opens to form new single bonds with neighbours.
Addition polymerisation of ethene
n ethene monomers (each with a C=C) join to form the polyethylene repeat unit — the product has ONLY single bonds; the double bond is used up making links to neighbouring units.
Worked example
Explaining the polymer backbone via tetravalency, catenation and stability
Leaving double bonds in the polymer repeat unit
Drawing the repeat unit of polyethylene as , keeping the double bond from the monomer.
Consequence: Structurally wrong — describes a completely different (and far less stable) polymer, and shows a misunderstanding of what happens during addition polymerisation (the double bond is what's used to make the new links, so it doesn't survive into the product).
Fix: The repeat unit of an addition polymer from an alkene monomer ALWAYS has only single bonds in the backbone — the C=C is consumed forming links to neighbours.
Key takeaways
- Addition polymerisation: many unsaturated monomers (with a C=C) join into one long-chain polymer, releasing no by-product.
- Tetravalency keeps each carbon's bond count fixed at 4; catenation lets the chain extend indefinitely.
- The polymer's C-C backbone contains ONLY single bonds — the monomer's double bond is used up making links to neighbours.
- Strong, non-polar C-C/C-H bonds make plastics chemically stable in use, but that same stability makes them persist as environmental waste.
Fractional Distillation of Crude Oil
Separating crude oil by boiling point
Crude oil is a mixture of thousands of different hydrocarbons, mostly alkanes of different chain lengths, with no fixed boiling point of its own. Fractional distillation is a PHYSICAL separation — no chemical bonds are broken — that exploits the fact that longer-chain hydrocarbons have higher boiling points than shorter-chain ones.
- Crude oil is heated until it vaporises, and the vapour rises up a tall fractionating column that is hot at the bottom and progressively cooler towards the top.
- Each hydrocarbon condenses back to liquid once it reaches the height where the column temperature drops below its own boiling point — long-chain (heavy, high boiling point) hydrocarbons condense low down; short-chain (light, low boiling point) hydrocarbons condense near the top or leave as gas.
- Output fractions, top (lightest) to bottom (heaviest): refinery gas, gasoline (petrol), kerosene (paraffin), diesel (gas oil), lubricating/fuel oil, bitumen (residue).
- Longer-chain fractions are more viscous and less flammable/volatile — bitumen at the bottom is a thick, near-solid tar used for roads; refinery gas at the top is a highly flammable gas used for heating and cooking.
Fractionating column for crude oil
Temperature falls up the column; short-chain, low-boiling-point hydrocarbons condense highest.
Fractions of crude oil (top to bottom)
| Fraction | Approx. carbon chain length | Approx. boiling range | Main use |
|---|---|---|---|
| Refinery/petroleum gas | C1-C4 | below 40°C | cooking and heating fuel (LPG) |
| Gasoline (petrol) | C5-C10 | 40-100°C | fuel for cars |
| Kerosene (paraffin) | C10-C16 | 150-250°C | jet fuel, paraffin heaters |
| Diesel (gas oil) | C14-C20 | 250-350°C | fuel for diesel engines, trains, ships |
| Lubricating/fuel oil | C20-C50 | 350-500°C | engine lubricants, ship/power-station fuel |
| Bitumen (residue) | above C50 | above 500°C (doesn't fully vaporise) | road surfacing, roofing |
Confusing distillation with cracking
Describing fractional distillation as something that 'breaks big molecules into smaller ones'.
Consequence: Mixes up two different processes — distillation is purely physical (separation by boiling point, no bonds broken); cracking is chemical (breaking C-C bonds to convert long-chain fractions into shorter, high-demand ones like petrol). Confusing them loses the mark for correctly identifying the process.
Fix: Distillation SEPARATES existing molecules by physical property (boiling point) — nothing changes chemically. Cracking CHEMICALLY BREAKS long molecules into shorter ones. Keep the two in separate mental boxes.
Examiner tip
The petrochemical industry runs on this one separation
Key point
Key takeaways
- Fractional distillation physically separates crude oil's hydrocarbons by boiling point — no chemical bonds are broken.
- Longer carbon chains = higher boiling point = condense lower in the column; shorter chains condense near/at the top.
- Fraction order top to bottom: refinery gas, gasoline, kerosene, diesel, lubricating oil, bitumen.
- Distillation ≠ cracking: distillation separates, cracking chemically breaks long-chain hydrocarbons into shorter, more useful ones.
Quick Reference
Organic Chemistry — everything on one page
Formulas
- alkanes (saturated)
- alkenes (one C=C)
- alkynes (one C≡C)
- alcohols, suffix -ol
- carboxylic acids, suffix -oic acid (COOH carbon = C1)
- esterification (condensation, conc. H₂SO₄ catalyst)
- addition polymerisation of ethene
Key facts
- Carbon valence electrons
- 4 (electron configuration 2,4)
- C-H bond angle in methane
- 109.5° (tetrahedral)
- C-C single bond length/enthalpy
- ~154 pm / 348 kJ mol⁻¹
- C=C double bond length/enthalpy
- ~134 pm / 612 kJ mol⁻¹
- C≡C triple bond length/enthalpy
- ~120 pm / 837 kJ mol⁻¹
- Esterification catalyst
- concentrated H₂SO₄
- Crude oil separation method
- fractional distillation (physical, by boiling point)
Mnemonics
- My Elephant Practices Ballet, Performing High Handstands On Nine DrumsCarbon prefixes 1-10: Meth Eth Prop But Pent Hex Hept Oct Non Dec
Don't confuse
- Chain isomerism vs Positional isomerism: Chain = different branching of the carbon skeleton; positional = same skeleton, functional group on a different carbon.
- Substitution vs Addition: Substitution swaps an H for another atom (alkanes + halogen, needs UV/heat); addition adds across a C=C/C≡C (alkenes/alkynes + bromine water, instant, no extra energy needed).
- Fractional distillation vs Cracking: Distillation is physical separation by boiling point (no bonds broken); cracking is a chemical reaction that breaks C-C bonds to make shorter molecules.
Command terms
- Construct:
- Draw every atom/bond explicitly (or build the requested table/graph) — a description in words scores zero.
- State:
- One concise fact, no reasoning required or rewarded.
- Explain:
- Give the reason/mechanism, not just the observation — link cause to effect.
- Deduce:
- Conclusion must be tied explicitly to the data given in the question.
- Distinguish:
- Paired comparison — say what X does AND what Y does, not just one of them.
Exam checklist
- Can you draw a Lewis dot diagram for methane, ethane, ethene and ethyne from memory, with correct dot counts?
- Can you name a branched alkane/alcohol by finding the longest chain THROUGH the functional group and numbering for the lowest locant?
- Can you tell chain isomers apart from positional isomers, and explain a boiling point/solubility trend using branching, not hydrogen bonding alone?
- Do you know which test (bromine water, UV+chlorine, carbonate/CO₂) identifies which functional group, and why?
- Can you name an ester in the correct order (alcohol '-yl' first, acid '-oate' second)?
- Can you explain polymer formation using BOTH tetravalency and catenation by name?
- Can you explain why fractional distillation separates crude oil (boiling point ∝ chain length) without confusing it with cracking?