IB Middle Years Programme · Chemistry MYP Year 5

Stoichiometry & Mole Concept

Cover illustration for Stoichiometry & Mole Concept (Chemistry MYP Year 5).
MYP · Chemistry MYP Year 5

Stoichiometry & Mole Concept

24 min readStandardCore graded unit — assessed through MYP Criterion B/C investigation tasks and calculation-heavy short-answer questions; regularly framed around real industrial contexts (e.g. Haber process, emissions data) rather than pure numbers.

Every question in this chapter is really asking the same thing: how many particles am I actually working with? The mole is just a very large counting number with a name, and once you can move fluently between mass, moles and particles, every 'calculate the mass/concentration/yield of...' question collapses into the same three-line routine — balanced equation, mole ratio, molar mass. Most marks lost here aren't conceptual; they're unit slips (cm³ vs dm³, tonnes vs grams) and forgetting to convert to moles before touching a ratio.

Overview — The Shape of the Chapter

Why chemists count in 'moles' at all

  • Atoms and molecules are absurdly small and light — a single water molecule has a mass of about g, far too small to weigh on any real balance.
  • The mole fixes this by defining an enormous, exact number of particles () as 'one unit' — like calling 12 eggs 'a dozen', except this number is chosen so one mole of atoms has a mass in grams numerically equal to its relative atomic mass.
  • Every calculation in this chapter — however dressed up with industrial plants or lab balances — is just converting between mass, moles and number of particles (or volume/concentration for solutions and gases).

The shape of the chapter

Command terms this topic loves to test

Command termWhat it demandsAOMark-earning move
StateGive a brief, precise fact, value or unit — no working required.AO11 mark needs the value AND its unit together — a correct number with no unit typically scores zero.
CalculateObtain a numerical answer, showing the working that leads to it.AO2Marks sit on the method steps (formula, correct substitution) as well as the final answer — an unsupported correct number can still lose method marks.
DetermineObtain a value from given data, often needing an extra decision first (e.g. which reagent is limiting).AO2/AO3Expect an intermediate step to be identified explicitly before the final number is credited.
DeduceReach a conclusion using reasoning from the data given, not a recalled fact.AO3The justification sentence carries its own mark — a correct number with no reasoning line loses it.
ExplainGive a reason or mechanism, linking cause to effect ('because...', 'this means...').AO3A bare unlinked statement scores zero for 'explain' — the causal link is what's actually marked.
IdentifyName or select the correct item from given information.AO1Usually 1 mark for the precise correct term — no explanation expected unless the question also says 'and explain'.

Key point

The mole is a counting unit, not a mass or a substance — 'one mole of X' always means particles of X, whatever X is. Every other equation in this chapter is arithmetic built on that single fact.

The Mole Concept and Avogadro's Constant

What exactly is a mole?

  • A mole is the amount of substance containing exactly elementary entities — this fixed number is Avogadro's constant, .
  • It's a counting unit exactly like 'a dozen' or 'a pair', just scaled up to a number big enough to be useful for atoms and molecules.
  • The word 'particles' does a lot of work here — it can mean atoms, molecules, ions, formula units, or even electrons. Always state which particle you mean: 1 mol of molecules is not the same as 1 mol of H atoms.

Because is defined per mole, it carries the unit — and this is exactly why the argument 'Avogadro's constant is dimensionless, you're just counting' fails. Counting requires a defined reference amount to count against; that reference (the mole) is what gives its unit.

Mole (mol)
The SI base unit for amount of substance; one mole contains exactly elementary entities.
Avogadro's constant ()
— the number of elementary entities present in exactly one mole of a substance.
Amount of substance (n)
A measurable quantity, in moles, telling you how many elementary entities are present — distinct from mass or volume.

number of particles = amount (mol) × Avogadro's constant

— number of particles (no unit (a count))
— amount of substance (mol)
— Avogadro's constant (mol^{-1})
Memorise

The Mole as a Counting Bridge

The mole is the bridge that lets a lab balance 'talk' to individual atoms and molecules.

Balance (macroscopic scale)Mole (bridge unit)Individual atoms/molecules (sub-microscopic scale)

Worked example

Ratio of particles to amount

[3]
A research team records the number of particles present in different molar amounts of a pure substance: 0.5 mol → ; 1.0 mol → ; 2.0 mol → ; 3.0 mol → . Calculate the ratio for each data point and state what this ratio represents.

Common mistake

Writing 'the sample has 2 moles' when the question actually gives grams, or assuming a heavier sample automatically has more particles.

Consequence: Loses the identify/state mark before any calculation even starts — examiners award a method mark for correctly recognising which quantity (m, n, or N) has been given.

Fix: Before calculating anything, label every number in the question with its quantity and unit (g, mol, or particles) — if the unit is grams, convert via before touching .

Examiner tip

'State the value of ' (1 mark) requires the unit written explicitly — '' with no unit typically scores zero even though the number itself is correct.

Key takeaways

  • — always include the unit, it's not just a big number.
  • One mole of ANY substance contains the same number of particles, but a different mass, because different particles have different masses.
  • 'Particles' must be specified: atoms, molecules, ions, formula units — 1 mol of is 1 mol of molecules but 2 mol of O atoms.

Calculating Relative Formula Mass

Building Mr from the periodic table

  • Relative atomic mass () is a weighted average based on the natural abundance of an element's isotopes — that's why chlorine's is 35.5, even though no single chlorine atom actually has that mass.
  • Relative formula mass () is the sum of every atom's in the formula, counted exactly as the formula shows.
  • Neither nor has units — they're ratios relative to the mass of a carbon-12 atom, which is why molar mass (in g mol⁻¹) is the number you actually use for calculations.

Brackets multiply everything inside by the subscript outside — means 1 Ca + 2 O + 2 H, not 1 Ca + 1 O + 1 H. Missing this bracket-expansion step is the single most common arithmetic slip in the whole chapter.

relative formula mass = sum of (atomic mass × how many of that atom appear in the formula)

Memorise

Worked example

Formula mass with a bracket

Calculate the relative formula mass of magnesium nitrate, . (: Mg = 24.3, N = 14.0, O = 16.0)

Frequently confused

Concept AConcept BThe distinction that matters
Relative atomic mass ()Relative formula mass () belongs to a single element, read straight off the periodic table; is the sum of values for every atom in a compound's whole formula.

Key takeaways

  • = sum of all atomic masses in the formula, counting subscripts and bracket multipliers carefully.
  • Neither nor carries a unit — molar mass () is the usable, unit-bearing version.
  • Expand every bracketed group first, before adding — write a full atom-count line as a checklist step.

Moles, Mass and Molar Relationships

The mole triangle: mass, moles and molar mass

  • Molar mass () is the mass of exactly one mole of a substance, in — numerically equal to , but now carrying a unit and connecting to a real balance reading.
  • Mass, moles and molar mass are locked together by one relationship — rearrange it depending on what's given and what's asked.
  • For gases, the same idea extends to volume: at room temperature and pressure (RTP), one mole of any gas occupies approximately .

A balance reading in grams is never automatically '1 mole' of anything — it only equals 1 mole if that specific mass happens to equal the substance's molar mass, and even then must be checked, not assumed.

amount (mol) = mass (g) ÷ molar mass (g mol⁻¹)

— amount of substance (mol)
— mass (g)
— molar mass (g mol^{-1})
Memorise

for gases: amount (mol) = gas volume ÷ molar gas volume

— volume of gas (dm^3)
— molar volume of a gas at RTP (dm^3\,mol^{-1}\ (\approx 24))

Use whichever molar volume value the question states — different sources quote 24 dm³ mol⁻¹ at RTP or 22.4 dm³ mol⁻¹ at STP.

The Mole Triangle (mass–moles–molar mass)

Cover the quantity you're solving for; the layout of the other two tells you whether to multiply or divide.

m (mass, g)n (moles, mol)M (molar mass, g mol⁻¹)

Mass vs Amount of Substance for Calcium Carbonate

The gradient of a mass-vs-moles graph is always equal to the molar mass.

Amount of CaCO3, n (mol)Mass of CaCO3, m (g)gradient = M = 100 g mol⁻¹

Worked example

Reading molar mass from a graph

The graph shows mass plotted against amount of substance for calcium carbonate. A student marks a point on the line at (1.50 mol, 150 g). Use this point to calculate the molar mass of from the graph, and check it against the value calculated from atomic masses (: Ca = 40.1, C = 12.0, O = 16.0).

Worked example

Does a balance reading equal exactly one mole?

A digital balance reads 63.55 g for a pure copper (Cu) sample. A student claims: 'This equals the molar mass of copper, so the sample contains exactly one mole of Cu atoms.' Deduce whether the student is correct.

Four routes to 'moles' — pick the one that matches your data

Quantity givenFormula to useTypical unit of given quantity
Massn = m/Mg
Number of particlesn = N/N_Ano unit (a count)
Concentration + volume of solutionn = cVmol dm⁻³ and dm³
Volume of gas at RTPn = V/V_m (V_m ≈ 24 dm³ mol⁻¹)dm³

Remembering the mole triangle

Cover-Up Triangle: m on top, n and M on the bottom.

Cover the letter you're solving for — side-by-side letters multiply (like ); stacked letters divide, top over bottom (like ).

Key takeaways

  • is the single most-used equation in this chapter — rearrange it every time rather than re-deriving it.
  • A balance reading equalling the molar mass value only means exactly 1 mole once purity and accuracy have been checked.
  • On a mass-vs-moles graph, the gradient IS the molar mass — always read it from a clean gridline point.

Concentration of Solutions

Concentration links moles to solution volume

  • Concentration tells you how crowded a solution is with solute particles — moles of solute per litre (dm³) of solution, not per litre of solvent.
  • The unit (sometimes labelled M, molar) is what most reagent bottles are marked in.
  • The volume in is the volume of the whole solution once made up to the mark — never the volume of water added.

Lab equipment (burettes, pipettes, volumetric flasks) is graduated in , but the concentration formula needs — divide by 1000 before doing anything else, every single time.

Concentration (c)
The amount of solute, in moles, dissolved per unit volume of solution, measured in .
Solute / Solvent / Solution
Solute = substance being dissolved; solvent = liquid doing the dissolving (usually water); solution = the resulting homogeneous mixture.

concentration = amount of solute (mol) ÷ volume of solution (dm³)

— concentration (mol dm^{-3})
— moles of solute (mol)
— volume of solution (dm^3)
Memorise

when diluting: moles of solute stay constant before and after adding water

Extension relationship for dilution calculations — only volume and concentration change on dilution, moles do not.

Preparing a standard solution

Weigh, dissolve, then make up to the mark — the volume used in c = n/V is the final solution volume.

weighing balancevolumetric flaskgraduation mark / meniscus

Worked example

Mass needed for a standard solution

Calculate the mass of sodium hydroxide, NaOH, needed to prepare 250 cm³ of a 0.100 mol dm⁻³ solution. ( of NaOH = 40.0)

Common mistake

Plugging a volume in straight into instead of converting to first.

Consequence: Produces an answer exactly 1000× too large or too small — examiners can usually tell the unit conversion step was skipped, so the method mark for that step is lost even if the rest of the working is otherwise correct.

Fix: Write '÷1000' as an explicit line of working every time a volume is given in cm³, before touching the concentration formula.

Examiner tip

'Calculate the concentration' expects the final unit stated explicitly — a number alone, or the wrong unit (e.g. g dm⁻³ when moles were asked for), typically drops the final answer mark even if the number is right.

Key takeaways

  • needs volume in — convert from by dividing by 1000 as the very first step.
  • Concentration is relative to the final solution volume, never the volume of water added before topping up.
  • State units at every stage — mol, dm³, and mol dm⁻³ are easy to mix up under time pressure.

Reacting Mass Calculations and Limiting Reagents

Using the balanced equation as a recipe

  • A balanced equation gives the mole ratio between reactants and products — that ratio is fixed no matter how large or small the actual quantities are.
  • The limiting reagent is whichever reactant runs out first; it controls the maximum possible mass of product, regardless of how much of the other reactant is present.
  • Never plug raw masses straight into the mole ratio — masses must be converted to moles first, because the equation's coefficients apply to moles, never to grams.

Real industrial equations, like the Haber process , get scaled to enormous tonnages — the arithmetic is identical to a school-lab calculation, just with more zeros and a tonnes-to-grams conversion bolted onto each end.

mole ratio from the balanced equation links the amounts of any two species in the reaction

The species giving the smallest value of n ÷ coefficient is the limiting reagent.

Identifying the Limiting Reagent

H2 runs out before N2 in a 2:3 mixture, because the equation needs H2 in a 3:1 ratio to N2.

N2 moleculesH2 moleculesNH3 moleculesexcess N2 remaininglimiting reagent: H2

Worked example

Finding the limiting reagent

2.00 mol of is mixed with 3.00 mol of and allowed to react: . Determine which reactant is limiting.

Worked example

Scaling up the Haber process

A proposed ammonia plant aims to produce tonnes of per year via the Haber process. Calculate the mass of hydrogen gas, , theoretically required, assuming complete conversion. (, )

Feeding people vs. releasing carbon

Synthetic ammonia fertiliser from the Haber process is estimated to sustain roughly 40–50% of the world's population by supplying nitrogen that plants can't get from the air directly. But hydrogen for the process is usually sourced from natural gas (methane), releasing large quantities of as a by-product — a single large plant can emit over a million tonnes of a year. Every reacting-mass calculation in this section has a real trade-off sitting behind the numbers: more fertiliser, more food, more emissions.

Common mistake

Reading '3H2' in the equation and multiplying a given MASS of by 3 to get the mass of needed, skipping the conversion to moles entirely.

Consequence: The coefficient ratio only applies to moles, not grams — this shortcut gives a numerically wrong answer even though it 'looks like' it's using the equation correctly, losing all method marks past that point.

Fix: Always convert every given mass to moles first, apply the ratio in moles, then convert the answer back to mass — never skip the middle step.

Frequently confused

Concept AConcept BThe distinction that matters
Limiting reagentExcess reagentThe limiting reagent is completely used up and sets the maximum possible amount of product; the excess reagent is only partially reacted, with some left over unreacted at the end.

Key takeaways

  • Convert every mass to moles before touching the equation's coefficients — the ratio applies to moles only.
  • Find the limiting reagent by dividing each reactant's moles by its own coefficient — the smallest result runs out first.
  • Industrial-scale questions use the same three steps as lab-scale ones, just with a tonnes-to-grams conversion bolted onto each end.

Percentage Yield and Atom Economy

How much of the theoretical maximum did you actually get?

  • Percentage yield compares what you actually collected against the maximum theoretically possible from the limiting reagent.
  • Real yields are always below 100% — reactions can reach equilibrium before completion (like the reversible Haber process), side reactions consume reactants, and product is lost during transfers, filtration and purification.
  • A reaction can have a high atom economy but a low percentage yield (inefficient technique), or the reverse (a wasteful reaction carried out perfectly) — the two numbers answer completely different questions.

Atom economy asks what fraction of the mass of ALL the reactant atoms ends up in the desired product, ignoring how much you actually managed to collect. It's a property of the reaction's chemistry, calculated purely from the equation before anyone even sets foot in a lab.

percentage yield compares the mass actually obtained to the maximum mass calculated from the limiting reagent

Memorise

atom economy measures what fraction of reactant mass ends up as useful product, based purely on the equation

Memorise

Worked example

Percentage yield in the Haber process

A plant reacts of with excess . The theoretical maximum mass of is calculated as , but the plant actually collects . Calculate the percentage yield.

Worked example

Atom economy with a by-product

Bromoethane is prepared by reacting ethanol with hydrogen bromide: . Calculate the atom economy of this reaction for producing . (: , , )

Percentage Yield vs Atom Economy

AspectPercentage YieldAtom Economy
What it measuresHow much product you actually collected vs. the theoretical maximumWhat fraction of reactant mass ends up in the desired product, by the equation alone
Formulaactual ÷ theoretical × 100Mr(desired product) ÷ ΣMr(reactants) × 100
Needs a real experiment?Yes — actual mass must be measuredNo — calculated purely from the balanced equation
Affected by side reactions / losses in transferYes, heavilyNo — depends only on which reaction pathway is chosen
Can it reach 100%?Rarely, in practiceYes, if there's only one product and no by-products

Which one goes on top?

'A' for Actual, 'A' for Above — Actual always sits Above the line (numerator) in percentage yield.

Helps avoid the classic yield-over-100% error caused by flipping the fraction the wrong way round.

Green chemistry and the pharmaceutical industry

Atom economy became a major industrial concern once pharmaceutical companies realised some drug syntheses had atom economies below 10% — meaning over 90% of the reactant atoms ended up as waste, often toxic solvents and by-products requiring expensive disposal. Modern 'green chemistry' redesigns synthetic routes specifically to raise atom economy, sometimes accepting a slightly lower percentage yield in exchange for a route that wastes far fewer atoms overall — the two numbers can genuinely pull in different directions when a process is optimised.

Examiner tip

Atom economy questions expect the values used exactly as stated in the question — recalculating them from atomic masses when is already given wastes time and risks a rounding-based 'wrong answer' on a question really testing the formula, not arithmetic.

Key takeaways

  • Percentage yield needs a real experiment (actual mass); atom economy is calculated purely from the equation and never needs a lab.
  • Actual yield always goes on top of the percentage yield formula — an answer above 100% means the fraction was flipped.
  • Only the desired product's mass counts in the atom economy numerator, even if the reaction makes other real products alongside it.

Quick Reference

Stoichiometry & Mole Concept — At a Glance

Formulas

  • particles = moles × Avogadro's constant
  • moles from mass and molar mass
  • moles from number of particles
  • concentration in mol dm⁻³, V must be in dm³
  • moles of gas at RTP, V_m ≈ 24 dm³ mol⁻¹
  • actual on top; can never exceed 100%
  • calculated purely from the equation, no experiment needed

Key facts

Avogadro's constant
6.02 × 10²³ mol⁻¹
Molar gas volume at RTP
≈ 24 dm³ mol⁻¹
Standard concentration unit
mol dm⁻³ (volume in dm³, not cm³)

Mnemonics

  • Cover-Up Triangle: m on top, n and M on the bottom.Cover the letter you want — side-by-side letters multiply, stacked letters divide (top over bottom).
  • 'A' for Actual, 'A' for Above.Actual yield always sits above the line in the percentage yield formula.

Don't confuse

  • Relative atomic mass () vs Relative formula mass (): is for one element; sums over a compound's whole formula.
  • Limiting reagent vs Excess reagent: Limiting reagent runs out and sets the maximum product; excess reagent has some left over unreacted.

Command terms

State:
Give the value and unit only — no working needed.
Calculate:
Show full working and give a final answer with its unit.
Determine:
Use the given data, often with an extra decision step, to reach a value.
Deduce:
Reach and justify a conclusion using reasoning from the data given.
Explain:
Link a fact to its cause — a bare statement alone scores zero.

Exam checklist

  • Convert all masses to moles before using equation ratios.
  • Convert cm³ to dm³ before using c = n/V.
  • Include units on every final answer (mol⁻¹, mol dm⁻³, g mol⁻¹).
  • Check % yield and atom economy answers are ≤ 100%.
  • Expand brackets fully before summing Mr.
  • Divide by the coefficient to find the limiting reagent — never compare raw moles directly.